Broadcast Field ses mixer rental Istanbul

Inputs: Balanced XLR Female x4

Output: Balanced XLR Male x2
1/4" Phone x1
3.5mm Mini x1

Monitor/Headphone Out: 1/4" Phone
3.5mm Mini

Impedance: Line: 20k ohm
Mic: 2k ohm


Gain: Standard: +4 dBu (> 10 k ohm load) -2 dBu (600 ohm load)
Maximum: +20 dBu (>10 k ohm load) +13 dBu (600 ohm load)

Hum & Noise: Balanced Output: -120 dBu
(A weighted, Input Equivalent Level)

Frequency Response: 20 Hz - 30 kHz (+/- 1.5 dB)

Distortion: < 0.005% @ 1 kHz (@ LINE position +19 dBu output)

Metering: Standard Level: 0 VU (+4 dBu)

Phantom Power: +48V (+/- 4V)

Power: Battery Requirement: 6 Alkaline "AA"
Battery Runtime: Approx. 10 hours (Meter Illum. & Phantom Power OFF)
External Power: 12VDC @ 200mA
Current Drain: 155mA (Meter Illum. & Phantom Power OFF - @ 9V)
195 mA (Meter Illum. OFF/Phantom Power ON w/2-SGM-1000 - @ 9V)

Base Dimensions (WxHxD): 8.6 x 1.9 x 5.9" (220 x 56 x 150mm)

Weight: 6 lbs (2.72 kg)

The Azden FMX-42 is a portable 4-channel audio mixer designed for professional and semi-professional field audio capturing. The FMX-42 features 4 balanced 3-pin XLR microphone inputs with individually switched +48VDC phantom power. A pair of balanced XLR outputs provide line level signal to cameras, recorders, etc. Additional features include a switchable input limiter to reduce the possibility of overload distortion, Left / Center / Right Pan switches on all input channels and enhanced circuitry for improved signal-to-noise ratio. Overall, the Azden FMX-42 proves to be an affordable field mixing solution for event videos, ENG / EFP applications, documentaries, and more.

Key Features

• Balanced Mic Inputs: The FMX-42 features 4 XLR microphone inputs. The balanced inputs deliver high gain and low noise floor.

• VU Meters: Dual analog meters provide a comprehensive read on audio level.

• Balanced Line Level Outputs: Dual balanced line level outputs via XLR male connectors provide balanced audio signal to line level inputs on cameras and additional mixers.

• 2 Channel Addressable Outputs: Incoming signal from either channel can be assigned to either left or right outputs if signal isolation is desired.

• Input Limiters: Both inputs feature high quality switchable limiters. The limiters protect against peak distortion due to overload.