Product Highlights
The Azden FMX-42 is a portable 4-channel audio mixer designed for professional and semi-professional field audio capturing. The FMX-42 features 4 balanced 3-pin XLR microphone inputs with individually switched +48VDC phantom power. A pair of balanced XLR outputs provide line or mic level (switchable) signal to cameras, recorders, etc. Additional features include a switchable input limiter to reduce the possibility of overload distortion, Left / Center / Right Pan switches on all input channels and enhanced circuitry for improved signal-to-noise ratio. Overall, the Azden FMX-42 proves to be an affordable field mixing solution for event videos, ENG / EFP applications, documentaries, and more.
Balanced Mic Inputs
The FMX-42 features 4 XLR microphone inputs. The balanced inputs deliver high gain and low noise floor.
VU Meters
Dual analog meters provide a comprehensive read on audio level.
Balanced Line or Mic Level Outputs
Dual balanced line or mic level switchable outputs via XLR male connectors provide balanced audio signal to inputs on cameras and additional mixers.
2 Channel Addressable Outputs
Incoming signal from either channel can be assigned to either left or right outputs if signal isolation is desired.
Input Limiters
Both inputs feature high quality switchable limiters. The limiters protect against peak distortion due to overload.
| Inputs | Balanced XLR Female x4 |
| Output |
Balanced XLR Male x2
1/4" Phone x1 3.5mm Mini x1 |
| Monitor/Headphone Out |
1/4" Phone
3.5mm Mini |
| ALT I/O | No |
| Link Input/Output | No |
| Impedance |
Line: 20 kOhms Mic: 2 kOhms |
| Gain |
Standard: +4 dBu (> 10 kOhm load) -2 dBu (600 Ohm load)
Maximum: +20 dBu (>10 kOhm load) +13 dBu (600 Ohm load) |
| Hum & Noise |
Balanced Output: -120 dBu
(A weighted, Input Equivalent Level) |
| Frequency Response | 20Hz - 30kHz (±1.5 dB) |
| Distortion | 0.005% @ 1 kHz (@ LINE position +19 dBu output) |
| Metering | Standard Level: 0 VU (+4 dBu) |
| Control Voltage Out | No |
| Phantom Power | +48V (±4V) |
| Operating Temperature | Not Specified by Manufacturer |
| Power |
Battery Requirement: 6 Alkaline "AA"
Battery Runtime: Approx. 10 hours (Meter Illumination & Phantom Power OFF) External Power: 12VDC @ 200mA Current Drain: 155mA (Meter Illumination & Phantom Power OFF - @ 9V) 195 mA (Meter Illumination OFF/Phantom Power ON w/2-SGM-1000 - @ 9V) |
| Base Dimensions (WxHxD) | 8.6 x 1.9 x 5.9" (220 x 56 x 150mm) |
| Weight | 6 lbs (2.72kg) |
3At vero eos et accusam et justo duo dolores et ea rebum stet clita kasd gubergren no sea takimata sanctus.
Est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipsci elitr, sed diam nonumy eirmod.